渤海湾盆地沙垒田地区新近纪走滑断裂发育特征及其对油气富集的控制作用

沙垒田凸起地区是渤海海域西部新近系油气最为富集的区域，为了明确新近系走滑断裂发育特征及对油气富集的控制作用，依托连片高精度三维地震、钻井取心等资料，对走滑断裂类型及发育特征进行了详细刻画，并对走滑断裂与成藏要素之间的关系进行了探讨。综合研究表明：研究区发育断穿基底走滑断裂、盖层走滑断裂及伸展-走滑断裂三种不同类型走滑断裂；走滑断裂对圈闭的控制作用表现为在不同类型走滑断裂控制下，断裂带内及断裂带间形成了多种类型圈闭，其中大型披覆背斜圈闭、断鼻、断背斜圈闭为有利圈闭，小型断块圈闭为不利圈闭；走滑断裂对输导体系的控制作用体现在断裂活动控制了骨架砂体输导体系及断裂输导体系的形成发育，有利于周边凹陷成熟烃源岩排烃及运移输导；走滑断裂对储层的控制作用表现为走滑作用形成的高角度裂缝提高了储层渗透率，改善了储层物性。新近纪普遍发育的走滑断裂是研究区油气富集的主控因素。     

新型建筑材料在建设工程中应用与发展趋势

随着我国改革开放不断深入,科技水平的不断提升,人们对美好生活的追求,促使建筑材料飞速发展,以适应环保、节能、轻质、安全、高效的需求,从而取代能耗多、污染大、防火等级低不安全的建筑材料。本文例举了当前一些新型建筑材料的应用特点,并阐述了新型建筑材料的发展趋势。     

Control Model for Large‐Sized Gantry Type Linear Motor Slider

At present, many industrial carrier devices utilize linear motor sliders. However, a heavier load requires a linear motor (which is an example of a direct drive device) to get higher power, compared with a rotary motor with a ball screw slider (which is an example of an indirect drive device). In order to obtain higher power at a lower cost, a linear slider with multiple motors can be utilized, for example, a gantry type linear motor slider. Moving the gantry type slider requires two linear motors that are set up in parallel to enable synchronization control. Some conventional synchronization control methods have been proposed for the parallel twin linear slider; however, a large‐scaled gantry type linear motor slider has two unique problems: mechanical distortion caused by the limitations of installation environment and coupling caused by joints with low stiffness. This paper proposes a control model to solve these problems, and an identification method of each parameter. Furthermore, the effectiveness of the control model is verified by comparison with simulation results and experimental results.     

水蒸气对煤焦油模化物裂解行为及析碳的影响

采用机械化学法制备Ni-Ce/Al₂O₃催化剂，在固定床反应器中考察了水蒸气气氛对煤焦油模型化合物甲苯＋芘催化裂解行为的影响。根据产物生成规律提出了芘向萘转化的裂解机理，并以D₂O对其进行了验证。通过XRD、TG-DTG和Raman等表征了析碳的类型与结构特征。结果表明：相较于纯氮气气氛，水的加入可明显提升重质组分芘的裂解率，且随水碳比（S/C）增加呈先增加后降低的趋势，在S/C=0.15时达到最大值98.93%，比S/C=0时增加32.09%。析碳率随S/C比增加一直呈下降趋势，由S/C=0时的10.04%降至S/C=0.26时的5.39%。析碳分析结果表明，S/C=0时，生成的积炭类型主要是β型碳及γ型碳，水蒸气存在时，活性较高的α型碳含量增加，说明水蒸气的持续消碳作用抑制了C_α向C_β与C_γ方向转化。     

聚乙烯醇/牛I型胶原支架材料的制备及评价

研究了一种聚乙烯醇(PVA)和胶原(COL)复合支架材料的制备方法。采用氨基硅烷对PVA海绵表面进行了氨基化修饰后，通过戊二醛溶液交联牛Ⅰ型胶原(COL)，最后通过赖氨酸溶液封闭，获得一种PVA/COL复合支架材料。采用扫描电镜(SEM)、X光电子能谱仪(XPS)、傅里叶红外光谱(FT-IR)等手段对支架材料的理化性能进行表征，并通过细胞实验对支架材料的生物学性能进行评价。结果表明，经过COL修饰的PVA孔隙率为21.33%，平均孔径为168.68 ?m且均匀分布，支架材料接触角为20.03°。对支架材料的生物学评价结果表明C3A细胞在复合材料上黏附良好，优于PVA组；CCK-8增殖检测结果表明细胞在复合材料上呈增殖生长趋势，与对照组PVA相比差异显著(P?0.01)。将PVA和COL复合制备得到的支架材料具有良好的理化及生物学特性，具有广阔的应用前景。     

Novel method of constructing generalized Hoberman sphere mechanisms based on deployment axes

This study proposes a method of constructing type II generalized angulated elements (GAEs II) Hoberman sphere mechanisms on the basis of deployment axes that intersect at one point. First, the constraint conditions for inserting n GAEs II into n deployment axes to form a loop are given. The angle constraint conditions of the deployment axes are obtained through a series of linear equations. Second, the connection conditions of two GAEs II loops that share a common deployable center are discussed. Third, a flowchart of constructing the generalized Hoberman sphere mechanism on the basis of deployment axes is provided. Finally, four generalized Hoberman sphere mechanisms based on a fully enclosed regular hexahedron, arithmetic sequence axes, orthonormal arithmetic sequence axes, and spiral-like axes are constructed in accordance with the given arrangement of deployment axes that satisfy the constraint conditions to verify the feasibility of the proposed method.     

非摆线型采油螺杆泵转子复合加工机床研制

针对现有双头螺杆泵转子线型存在的问题以及加工方法的局限性,通过研究非摆线螺杆泵转子线型形成原理,设计了非摆线型采油螺杆泵转子复合加工机床,利用立铣刀对做行星运动的工件进行包络,加工出非摆线型螺杆泵转子。根据机床的机械结构以及转子加工表面的形成运动,对转子加工机床进行了运动分析,确定了机床各轴之间的运动关系。并分析立铣刀在加工转子时所产生的截面轮廓误差,确定了误差随工件自转转速变化的关系,对非摆线型螺杆泵转子的加工提供了参考。